Queensize Camper Brass Angle (3x) for connection to QC Mixer

Connection Angle Set for the QC Mixer QC-300-11 (from model year 2025)

This specially developed connection angle set is exclusively suitable for the QC Mixer QC-300-11 from model year 2025 – identifiable by the two M4 screws included with the mixer. With this set, the required installation space can be further reduced and a 12 mm quick-coupling system can be optimally integrated.

For the use of a 12 mm quick connector (e.g. John Guest, Reich UniQuick or Carbest), the existing hose barb can simply be cut off. Important: Cut the edge cleanly, carefully deburr it, and thoroughly clean the angle – ideally with compressed air – to prevent brass particles from entering the water system.

All three brass angles are carefully inserted into the M10x1 openings of the mixer. Then, the two M4 hex screws with lock washers (included with the mixer) are fastened. The angles can be freely aligned.

Note:
Even after tightening, the angles can still be turned slightly – this is normal. The screws only serve to secure the angles against water pressure and prevent them from being pushed out of the mixer.
Not compatible with other fittings or mixers – suitable only for the shower set from model year 2025.

Scope of delivery:
• 3 × Mixer connection angles
• No M4 screws included – these are already part of the mixer's scope of delivery.